T. Hata, Bambang Subyanto, S. Kawai and H. Sasaki: Production of Particleboard with Steam-injection Part l, Temperature Behavior in Particle Mat during Hotpressing and Steam-injection Pressing, Wood Science and Technology 23,361-369 (1989)
T. Hata, S. Kawai and H. Sasaki: Production of Particleboard with Steam-injection Part II, Computer Simulation of Temperature Behavior in Particle Mat during Hotpressing and Steam-injection Pressing, Wood Science and Technology 24, 65-78 (1990)
T. Hata, S. Kawai, T. Ebihara and H. Sasaki: Production of Particleboards with a Steam-Injection Press Vl. Effects of Particle Geometry on Board Properties, Mokuzai Gakkaishi,39(2), 169-173 (1993)
T. Hata, S. Kawai, T. Ebihara and H. Sasaki: Production of Particleboards with Steam-Injection Press V. Effects of Particle Geometry on Temperature Behaviors in Particle Mats and on Air Permeabilities of Boards, Mokuzai Gakkaishi,39(2), 161-168 (1993)
W. -Y. Su, T. Hata, Y. Imamura and S. Ishihara: Combustion Behavior of Boron-Alkali Metal Treated Wood Using Thermographic Analysis, Mokuzai Gakkaishi, 43(1),82-89(1997)
W. -Y. Su, Subyakto, T. Hata, Y. Imamura and S. Ishihara: Improvement of the Fire Retardancy of Strandboard by Surface Treatment with Melamine and Boric or Phosphoric Acids, Mokuzai Gakkaishi, 43(1), 75-81 (1997)
K. Nishimiya, T. Hata, Y. Imamura and S. Ishihara: Analysis of Chemical Structure of Wood Charcoal by X- ray Photoelectron Spectroscopy, J. Wood Science, 44(1) 56-61(1998)
W. -Y. Su, Subyakto, T. Hata, K. Nishimiya, Yuji Imamura and Shigehisa Ishihara: Improvement of Fire Retardancy of Plywood by Incorporation of Boron or Phosphate Compounds in the Glue, J. Wood Science, 44(2), 131-136(1998)
T. Hata, T. Yamane, E. Kobayashi, Y. Imamura and S. Ishihara: Microstructural Investigation of Wood Charcoal Made by Spark Plasma Sintering, J. Wood Science, 44, 332-334(1998)
T. Harada, T. Hata, S. Ishihara: Thermal Constants of Wood during the Heating Process Measured with the Laser Flash Method, J.Wood Sci. 44, 425-431 (1998)
Subyakto, T. Kajimoto, T. Hata, S. Ishihara, S. Kawai and H. Getto: Improving Fire Endurance of Fast Growing Wood by Coating of Fire Retardant and Surface Densification, Fire and Materials, 22, 207-212 (1998)
L. P. Novicio, T. Hata, T. Kajimoto, Y. Imamura and S. Ishihara: Removal of Mercury by Carbonized Wood Materials from Aqueous Solutions of Different Types of Mercury Compounds, Resource Processing Technology, 463-8 (1999)
T. Hata, Y. Imamura, E. Kobayashi, T. Yamane, K. Kikuchi, Onion-like Graphitic Particles observed in Wood Charcoal, J. Wood Science 46, 89-92 (2000)
Dede Hermawan, T. Hata, K. Umemura, S. Kawai, S. Kaneko, Y. Kuroki, New Technology for Manufacturing High Strength Cement-bonded Particleboard using Super Critical Carbon Dioxide, J.Wood Science 46, 85-88 (2000)
Subyakto, T. Hata, S. Kawai, Y. Imamura, I. Ide, Anisotropic Thermal Properties of Molded Carbon Phenolic Spheres, J.Wood Science 46, 16-21 (2000)
L. P. Novicio, T. Hata, Y. Kurimoto, S. Doi, S. Ishihara, Y. Imamura, Adsorption Capacities and Related Characteristics of Wood Charcoals Carbonized using One- step or Two Step Process, J.Wood Science 47(1), 48-57(2001)
Subyakto, T. Hata, I. Ide, S. Kawai: Fire-resistant performance of a laminated veneer lumber joint with metal plate connectors protected with graphite phenolic sphere sheeting, J Wood Sci 47:199-207 (2001)
Dede Hermawan, T. Hata, K. Umemura, S. Kawai, W. Nagaomi, Y. Kuroki, Rapid Production of High-Strength Cement- bonded Particleboard using Gaseous or Supercritical Carbon Dioxide, J.Wood Science 47(4), 294-300 (2001)
K. Ishimaru, T. Vystavel, P. Bronsveld, T. Hata, Y. Imamura, J. De Hosson, Diamond and pore structure observed in wood charcoal, J Wood Sci 47(4)414-416 (2001)
T. Hata, K. Nishimiya, P. Bronsveld, T. Vystavel, J. De Hosson, H. Kikuchi, and Y. Imamura, Electron Microscopic Study on Catalytic Carbonization of Biomass Carbon: I. Carbonization of Wood Charcoal at High Temperature by Al-Triisopropoxide, Molecular Crystals and Liquid Crystals vol.386 pp.33-38 (2002)
Dede Hermawan, T. Hata, W. Nagadomi, Y. Kuroki, S. Kawai, Manufacturing oil palm fronds cement-bonded board cured by gaseous or supercritical carbon dioxide, J Wood Sci 48(1), 20-24 (2002)
Dede Hermawan, T. Hata, S. Kawai, W. Nagadomi, Y. Kuroki: Effect of carbon dioxide-air concentration in the rapid curing process on the properties of cement-bonded particleboard, J. Wood Science, 48(3), 179-184 (2002)
T. Hata, P. Bronsveld, T. Vystavel, B. Kooi, J. DeHosson, T. Kakitani, A. Otono, Y. Imamura: Electron Microscopic Study on Pyrolysis of Chromium-Copper-Arsenate (CCA) Treated Wood, Journal of Analytical and Applied Pyrolysis Vol 68-69 pp 635-643 (2003)
Subyakto, Bambang Subyanto, T. Hata, S. Kawai: Evaluation of fire-retardant properties of edge-jointed lumber from tropical fast-growing woods using cone calorimetry and a standard fire test, J Wood Sci, 49:241-247 (2003)
F. Kurosaki, K. Ishimarua, T. Hata, P. Bronsveld,, E. Kobayashi, Y. Imamura, Microstructure of Wood Charcoal Prepared by Flash Heating, CARBON 41(15) 3057-3062 (2003)
Subyakto, T. Hata, I. Ide, T. Yamane, S. Kawai: Fire protection of a laminated veneer lumber joint by wood carbon phenolic spheres sheeting, J. Wood Science, 50(2) (2004)
K. Nishimiya, T. Hata, H. Kikuchi and Y. Imamura, Effect of Aluminum Compound Addition on Graphitization of Wood Charcoal by Direct Electric Pulse Heating Method, J Wood Sci, 50(2) 177-181(2004)
V. Castro, M. Fujisawa, T. Hata, P. Bronsveld, T. Vystavel, Jeff De Hosson, Hikari Kikuchi, Yuji Imamura: Silicon Carbide Nanorods and Ceramics from Wood, Key Eng. Mat. 264-268, p.2267-2270 (2004)
M. Fujisawa, T. Hata, P. Bronsveld, V. Castro, F. Tanaka, H. Kikuchi, T. Furuno, Y. Imamura: SiC/C composites from wood charcoal by pulse current sintering with SiO2, Electrical & Thermal properties, Journal of the European Ceramics Society , 24/13 pp. 3575-3580 (2004)
T. Hata, T. Vystavel, P. Bronsveld, J. DeHosson, H. Kikuchi, K. Nishimiya, Y. Imamura, Catalytic carbonization of wood charcoal: graphite or diamond?, CARBON 42(5-6) 961-964 (2004)
T. Kakitani, T. Hata, T. Kajimoto, and Y. lmaniura: Effects of Pyrolysis on Solvent Extractability from chromate copper arsenate (CCA)-treated wood, Journal of Hazardous Materials 109/1-3, 53-57 (2004)
T. Kakitani, T. Hata, T. Kajimoto and Y. Imamura: Two possible pathways for the release of arsenic during pyrolysis of chromated copper arsenate (CCA)-treated wood, Journal of Hazardous Materials, 113(1-3) 247-252 (2004)
T. Hata, P. Bronsveld, T. Kakitani, D. Meier, T. Kajimoto, Y. Imamura: Capturing the Arsenic Fraction of CCA treated Waste Wood in the Solid instead of in the gas phase during pyrolysis, Management of Environmental Quality, 15(5) p.502-508 (2004)
P. Bronsveld, T. Hata, T. Vystavel, J. DeHosson, H. Kikuchi, K. Nishimiya and Y. Imamura: Comparison between Carbonization of Wood Charcoal with Al-Triisopropoxide and Alumina, Journal of the European Ceramics Society, Volume 26, 719-723(2006)
M. Fujisawa, T. Hata, P. Bronsveld, V. Castro, F. Tanaka, H. Kikuchi, Y. Imamura: Thermoelectric properties of SiC/C composites from wood charcoal by pulse current sintering, Journal of the European Ceramic Society, 25, 2735-2738(2005)
T. Hata, V. Castro, M. Fujisawa, Y. Imamura, S. Bonnamy, P. Bronsveld and H. Kikuchi, Formation of Silicon Carbide Nanorods from Wood-Based Carbons, Fullerenes, Nanotubes, and Carbon Nanostrutures, 13:107-113, 2005
T. Hata, K. Ishimaru, M. Fujisawa, P. Bronsveld, T. Vystavel, J. DeHosson, H. Kikuchi, T. Nishizawa and Y. Imamura: Catalytic Graphitization of Wood-Based Carbons with Alumina by Pulse Current Heating, Fullerenes, Nanotubes, and Carbon Nanostructures, 13: 435-445, 2005
T. Kakitani, T. Hata, T. Kajimoto and Y. Imamura: A Novel Extractant for Removal of Hazardous Metals from Preservative-Treated Wood Waste, Journal of Environmental Quality 35(3) 912-917, 2006.
T. Kakitani, T. Hata, T. Kajimoto and Y. Imamura: Designing a purification process for chromium-, copper- and arsenic-contaminated wood, Waste Management 26(5), 453-458 (2006)
T. Nakai, S. N. Kartal, T. Hata and Y. Imamura: Chemical characterization of pyrolysis liquids of wood-based composites and evaluation of their bio-efficiency, Building and Environment, 42, 1236-1241, 2007
K. Ishimaru, T. Hata, P. Bronsveld, Y. Imamura, Spectroscopic analysis of carbonization behavior of wood, cellulose, and lignin. J Mater Sci, 42(1) 122-129 (2007)
K. Ishimaru, T. Hata, P. Bronsveld, Y. Imamura, Microstructural study of carbonized wood after cell wall sectioning. J Mater Sci, 42(8), 2662-2668 (2007)
K. Ishimaru, T. Hata, P. Bronsveld, T. Nishizawa and Y. Imamura, Characterization of sp2- and sp3-bonded carbon in wood charcoal, Journal of Wood Science, 53(5) 442-448 (2007)
T. Kakitani, T. Hata, N. Katsumata, T. Kajimoto, H. Koyanaka, Y. Imamura, Chelating Extraction for Removal of Chromium, Copper, and Arsenic from Treated Wood with Bioxalate, Environmental Engineering Science 24(8): 1026-1037 (2007)
F. Kurosaki, H. Koyanaka, T. Hata and Y. Imamura, Macroporous carbon prepared by flash heating of sawdust, Carbon, 45(3), 671-673 (2007)
M. Fujisawa, T. Hata, H. Kitagawa, P. Bronsveld, Y. Suzuki, K. Hasezaki, Y. Noda and Y. Imamura,Thermoelectric properties of porous SiC/C composites,Renewable Energy 33, 309-313 (2008)
T. Kakitani, T. Hata, T. Kajimoto, H. Koyanaka and Y. Imamura, Characteristics of a bioxalate chelating extraction process for removal of chromium, copper and arsenic from treated wood, Journal of Environmental Management 90(5), 1918-1923 (2009)
Joko Sulistyo, T. Hata, M. Fujisawa, K. Hashimoto, Y. Imamura, and T. Kawasaki, Anisotropic thermal cconductivity of three-layer laminated carbon-graphitic composites from carbonized wood, J. Mater Sci 44, 734-744 (2009)
Joko Sulistyo, T. Hata, H. Kitagawa, P. Bronsveld, M. Fujisawa, K. Hashimoto, and Y. Imamura, Electrical and thermal conductivities of porous SiC/SiO2/C composites with different morphology from carbonized wood, J Mater Sci 45:1107-1116 (2010)
M. Ohkoshi, T. Hata, K. Nakato and K. Sadoh: Improvement of Permeability of Sugi by Treatment with Pectinaze, Bull. Kyoto Univ. Forests 57, 316-324 (1986)
Subyakto, T. Hata, T. Kajimoto and S. Ishihara: Fire Endurance of Surface Densified Wood of Albizzia Falcata Treated with Fire Retardant, Wood Research, No.82, 1-7(1995)
L. L. Pulido, B. B. Bisana, T. Hata, Y. Imamura and S. Ishihara: Metal Distribution in the Laguna Lake Water System and Adsorption of Some Metals by Carbonized Wood Powder, Wood Research, No.83, 54-61 (1997)
L. L. Pulido, T. Hata, T. Kajimoto, Y. Imamura and S. Ishihara: Removal of Mercury from Aqueous Solutions of Mercuric Chloride Using Wood Powder Carbonized at High Temperature, Wood Res., No.85, 48-55 (1998)
N. Asano, J., Nishimura, K. Nishimiya, T. Hata, Y. Imamura, S. Ishihara and B. Tomita: Formaldehyde Reduction in Indoor Environments by Wood Charcoals, Wood Research No.86, 867-868 (1999)
W. -Y. Su, Subyakto, M. K. Yalinkilic, T. Hata, Y. Imamura and S. Ishihara: Enhancement of Leach and Termite Resistance of Plywood Treated with Boric Compounds, Mokuzai Gakkaishi 43(7), 595-601 (1997)
L. L. Pulido, T. Hata, Y. Imamura, S. Ishihara and T. Kajimoto: Removal of Mercury and Other Metals by Carbonized Wood Powder from Aqueous Solutions of their Salts, J. Wood Science, 44 (3), 237-243 (1998)
L. P. Novicio, Y. Kurimoto, M. Aoyama, K. Seki, S. Doi, T. Hata, S. Ishihara, Y. Imamura, Adsorption of Mercury by Sugi Wood Carbonized at 1000°C, J.Wood Science 47(2),159-162 (2001)
T. Hata, Y.Imamura, D.Meier: Fast Pyrolysis for Potential Recycling Technology of Waste Chromium- Copper-Arsenate(CCA)-Treated Wood (Ed.Y.Imamura: High- Performance Utilization of Wood for Outdoor Uses), Press-Net, p.189-200 (2001)
T. Hata, D. Meier T Kajimoto, H. Kikuchi, Y Imamura: Fate of Arsenic After Fast Pyrolysis of Chromium- Copper-Arsenate (CCA) (Ed. A. V. Bridgwater: Treated Wood Progress in Thermochemical Biomass Conversion Volume 2) Blackwell Science, p.1396-1404 (2001)
T. Hata, L. Cookson, Y.-C. Jang, B. Tarakanadha, Y. Imamura, S. N. Kartal, T. Shibata: The Production and Management CCA-treated Wood in Asia and Oceania with Emphasis on Australia, India, Japan, and Korea (edited by T. Townsend and H. Solo-Gabriele) “Environmental Impacts of Treated Wood” CRC Press, Boca Raton, Florida, USA, 59-73 (2006)