2020

杉野秀明,田中聡一,笠松由芽,奥林里子,関雅子,三木恒久,梅村研二,金山公三:バルク木材の塑性流動変形に及ぼす電子線照射の影響、木材学会誌、66(2)59-66(2020)
Eko Widodo, Sukma Surya Kusumah, Subyakto, Kenji Umemura: Development of Molding using Sweet Sorghum Bagasse and Citric Acid: Effects of Application Method and Citric Acid Content, Forest Products Journal, 70(2) 151-157 (2020) DOI: 10.13073/FPJ-D-19-00060
Zhongyuan Zhao, Shunsuke Sakai, Di Wu, Zhen Chen, Nan Zhu, Chengsheng Gui, Shijing Sun, Min Zhang, Kenji Umemura, Qiang Yong: Investigation of Synthesis Mechanism, Optimal Hot-Pressing Conditions, and Curing Behavior of Sucrose and Ammonium Dihydrogen Phosphate Adhesive, Polymers, 12(1):216 (2020).  doi: 10.3390/polym12010216.
梶川 翔平,曺 基宇,久保木 孝,田中 聡一,梅村 研二,金山 公三:スクロースおよびクエン酸を混合したスギ粉末の熱流動に及ぼす粒子サイズの影響、材料、69(6)440-445(2020)
Zhongyuan Zhaoa, Caoxing Huanga, Di Wub, Zhen Chend, Nan Zhue, Chengsheng Guif, Min Zhang, Kenji Umemura, Qiang Yong: Utilization of enzymatic hydrolysate from corn stover as a precursor to synthesize an eco-friendly plywood adhesive, Industrial Crops & Products, Vol.152, 112501 (2020) doi.org/10.1016/j.indcrop.2020.112501
Shohei Kajikawa, Masaya Horikoshi, Takashi Kuboki, Soichi Tanaka, Kenji Umemura, and Kozo Kanayama: Fabrication of naturally derived product by thermal flow molding of wood powder with sucrose and citric acid, BioResources, 15(1) 1702-1715 (2020)
Miyuki Nakagawa; Kenji Umemura; Shuichi Kawai; Kozo Kanayama: Influence of Drying Temperature on NO2 Sorption Ability of Cedar Timber, Journal of Wood Science (under review)
Eko Setio Wibowo, Sukma Surya Kusumah, Subyakto Subyakto, Kenji Umemura: Cure Acceleration Mechanism of Citric Acid-Sucrose Adhesive by ZnCl2, Int. J. Adhes. Adhes. (Accepted)
Daisuke Ando, Kenji Umemura: Bond between wood components and citric acid in wood-based molding, Polymers, (Accepted).
Koji Murata, Mao Nakano, Kaoru Miyazaki, Norihiko Yamada, Yoshihiro Yokoo, Kuniharu Yokoo, Kenji Umemura, Masashi Nakamura: Utilization of Chinese fast-growing trees and the effect of alternating lamination using mixed-species eucalyptus and poplar veneers, J. Wood Sci., submitted.
Summia Rahman, Moushumi Akter, Sourab Bacchi Ratul, Md. Ashaduzzaman, Nazrul Islam, Sukma Kusumah, Kenji Umemura, Md. Iftekhar Shams: Development of high strength citric acid impregnated jute stick cross banded board, Journal of Materials Science, Submitted.
Dr Firda Aulya Syamani, Agus Zultri Arifqi, Bachelor; Sudarmanto Sudarmanto, Bachelor; Lilik Astari, Kurnia Wiji Prasetiyo, Sasa Sofyan Munawar, Mohamad Gopar, Ismadi Ismadi, Sukma Surya Kusumah, Subyakto Subyakto, Yusuf Sudo Hadi, Kenji Umemura: Sembilang Bamboo ( Dendrocalamus giganteus Munro) Particleboard Bonded with Citric Acid as Eco-friendly Material, Journal of Cleaner Production, Submitted.
Hideaki Sugino, Soichi Tanaka, Yuga Kasamatsu, Satoko Okubayashi, Masako Seki, Tsunehisa Miki, Kenji Umemura, Kozo Kanayama: Flow Forming of Wood Irradiated with Electron Beam ― Molding Load of Irradiated Wood and Mechanical Properties of Molded Material, BioResources, Submitted.
Cihat Tascioglu, Kenji Umemura, Sukma Kusuma, Coskun Kose, Mesut Yalcin, Caglar Akcay, Tsuyoshi Yoshmiura: Mold and Larvae Resistance of Wood-Based Composites Incorporating Sodium Fluoride, BioResources 15(1) 20-27 (2020)